Sound
A 'Sound' pane has been added to the Control Panel. It provides
balance, volume and mute controls for Wave (currently unused),
CD (audio from the CD-ROM drive), Line In and Line Out (on
the rear of the console) and the internal Speakers.
CD Control Toolbar
The CD Control Toolbar can be displayed by holding 'Open' and
clicking the 'CD Tools' button. Repeating this procedure will
cause the toolbar to close again.
A pause button has been added
to pause playback and resume it from the same point.
Three time
displays have been added; the current track time, the remaining
track time, and the current track length.
A 'seek bar' has been
added to the right hand side of the toolbar to provide feedback
on the playback position in the current track.
This bar can be clicked and dragged to jump to any point in the
current track. The small black marks above the bar are spaced
at 1 minute intervals for quick reference.
CD Timecode
Timecode can be generated from an audio CD by setting the console's
timecode source to 'CD' and playing the CD from the CD Control
toolbar. Note that this feature reads the digital timecode burnt
directly onto every audio CD. It does
not support the reading of an LTC audio track recorded as one
of
the two
audio
channels
on
a CD.
Syntax Changes
There have been a number of syntax changes, most notably to delete
and views.
Delete
The HogII style delete command has been removed;
you must now use '<source> Delete'
or hold Delete, visually select
what you want to delete, then release Delete.
Views
To record or delete a view from the views toolbar you
must now hold down record or delete and
then press the view button.
Unpark
Pig + Park
(to unpark) with no selection will unpark everything.
Clear Commandline
Double-press Backspace will clear the commandline.
Close popup toolbars
If there are any popup toolbars, eg. setup, grouping, etc...
then the first backspace will close the popup toolbar, subsequent
backspaces will remove entries on the command line.
Rename attached items
Set + Choose will
prompt you to rename the item attached to that master.
Next / Back cue syntax
In the Preview Editor, Cue + Next /
Back will move you forwards and backwards
through the list. The keypresses
are sent to the
active window, so you need to select a Preview Editor for this
to work.
Releasing Virtual Lists / Scenes
List + Release will
release any playing lists on virtual masters, unless they are
attached to a physical master on the
current page.
Similarly, Scene + Release does
the same for Scenes.
#4679 - [Setup]-> [preferences]
croak
#4671 - @ Enter broken in the fixture window
#4659 - Double-press syntax temporarily clears the commandline
#4656 - Output view in Compact mode generates lots of exceptions
#4654 - Opening gel picker croaks editor
#4649 - Releasing snaps to default feature
#4647 - Default view 'Cuelist' doesn't work
#4640 - Double pressing kind doesn't open directory
#4632 - [Delete] object Should mention specifics
#4626 - Default views there but not working
#4624 - Scene VM crossfading display incorrect
#4622 - Internal error with no fixtures available
#4617 - [Delete][Choose] should say 'Delete master x'
#4615 - Hand positioned windows not recalling correctly
in views
#4614 - Croak on View Cue
#4609 - Spreadsheet redraw errors
#4608 - Error on logoff
#4607 - Can't get files from ZIP to burn to CD
#4604 - Halt doesn't always work on fast chases
#4599 - Chase with high bpm plays erratically
#4595 - Fast chases on 2DP show restart after release
#4591 - Show DMX Values on DP croaks DP gui - outputs still
working
#4585 - Croak after [Apply] in wheelset editor and fixture
select
#4583 - Spreadsheet views wacky on ext monitors
#4581 - [Enter] in patch window broken
#4580 - Croak on starting up a new show
#4579 - Type not cleared on first clear in programmmer
#4574 - Desktop startup croak with Open Toolbar macro
#4571 - Selecting page via palette wil create page zero
#4570 - Fixture Select bug
#4560 - Using Next caused crash
#4559 - Links sometimes fail on 2DP show
#4558 - Assigning a cuelist defaults to FULL regardless
of fader.
#4556 - Page change release glitch with same programming
#4544 - Record with [State] on and [Foreward] off- locks
out editor
#4540 - Fixture Settings Integrity Breached
#4538 - Paging in directory windows, wider scroll bar in
spreadsheets
#4531 - Directory or cuelist names can be empty
#4529 - Cannot name a palette after a move
#4527 - VMs finger_up mapped incorrectly
#4526 - "Cue only" cuelist position indicator
incorrect
#4516 - "+go on flash" not functional for scenes
#4514 - UB40 Dp crash
#4505 - Implement default views
#4489 - Cuelist Lettering should be centred in the Cell
#4478 - Path Options Open Behind Playback Bar
#4455 - Abstract calc DP croak when goes active
#4449 - Button over the top of the control options label
#4440 - Abstract calc croak running Kylie show on autotest
#4423 - FX Encoders Not touching re-selected fixtures
#4413 - Source in preview editor is wrong if you have a
selection
#4411 - Cuelist page not updating after release H/O if
active
#4410 - Recalling a view with record on the commandline
manipulates view
#4406 - Rename the "Outputs View" button to avoid
confusion with the output window
#4390 - [Record][Merge][Update] leaves record toolbar open.
#4389 - Dialogs appearing on wrong screen
#4388 - Visual cut and paste ignores read only flag
#4356 - Adding a DP should auto select the first universe
#4317 - Pressing Set in the Fixture Schedule shows infernal
keyboard
#4309 - Editor crash stepping forwards in cue editor
#4307 - Patch->Outputs View->type button->fixture
schedule view-> broken
#4296 - Scrolled palette views not recalling properly
#4295 - Timecode startup croak
#4286 - Add Colour Picker to Colour Palette View
#4234 - [GOTO] [Choose] should not change chosen list
#4210 - Highlight palette not applying
#4209 - Output window croak updating palette
#4196 - Control panel recalls as help window.
#4177 - Open Cuelist, and I should get a little red square
focus too...
#4174 - Cue fade time can be set to max fade somehow
#4148 - [Copy] + [Choose] [Choose] syntax does not work
#4147 - Multiple cue copy does not work
#4140 - Error when merging into a palette
#4078 - Virtual Scene and Cuelist LCD feedback pool
#4018 - Playback bar doesn't indicate scene active/released
status, time
#3997 - Times >=41s round incorrectly
#3981 - Flash buttons, change time issues
#3962 - Editor commandline, visual selection not [Clear]ed
consistently
#3958 - "Choose" should not appear in command
line
#3944 - Couldn't patch 512 desk channels-wouldn't fit on
fixture
#3918 - [@] [Enter] does not remove FX from intensity
#3882 - MSC not output from IOP or console on startup new
show
#3872 - MSC outputs Release (Go_Off) twice on VMs
#3858 - Implicit enters with GOTO are dangerous.
#3833 - ZoneSetId? croaking after loading an invalid_item_id
#3806 - Internal error when undo'ing empty undo list,.
#3974 - Directory window cosmetics
#3740 - Output window doesn't annunciate control from chosen
scene
#3732 - Default zoom value
#3725 - Time-change-only changes seem to take forever getting
shipped out
#3692 - [Live] is broken
#3671 - Incomplete selection followed by clear leaves selection
in programmer
#3657 - Highlight does not work with 1.2 shows
#3655 - Live grabs parked fixtures.
#3653 - Problems with external keyboard when used with
Hog Unit
#3539 - Virtual scene visual indication needs work
#3513 - VM's broken when guard on
#3477 - Fixture Selection made with no valid type error
#3445 - Delete->view should be allowed via command line,
not bar selection
#3334 - Read only in editor cells do not have a grey caret
#3306 - When cuelist is not on stage, cuelist window doesn't
update
#3300 - Add syntax for forwards and backwards in View Cue
#3296 - Add List + Release and Scene + Release to release
VM's and VS
#3235 - Increase cuelist "Follow Current" line
buffer at bottom of screen
#3205 - Can't action cue number cells in Cuelist Window
#3116 - Virtual Masters release themselves randomly
#3078 - Cue list tool bar (bottom LHTS) should display
cue numbers as well as names
#3026 - Pressing a guarded HTP cuelist button appears to
go it
#2995 - Grouping toolbar has no close button.
#2980 - Parked Window Options invalid
#2933 - Park screen should be editor
#2894 - Should be a way to name a Cuelist without having
to go into the DIr
#2846 - Pressing Backspace to cancel a popup toolbar should
not clear selection
#2783 - New Delete syntax for cuelists on playback bar
error
#2773 - Timecode toolbar location not persistent
#2729 - [List] [Copy] [Choose] does nothing
#2720 - [Pig] + [Release] doesn't always release all running
masters
#2719 - Chase BPMs don't match rate with wait times
#2687 - Implement Gel picker directory
#2610 - Standardise Choose syntax.
#2560 - Hold backspace to clear entire command line?
#2487 - Can't backspace out of fixture schedule numeric
inplace edit.
#2456 - OB Streamer Croak
#2186 - Currently no way to delete a cue cue-only
#2166 - Improvements with [+] and [>] in patching syntax
#2052 - Double hit syntax
#1745 - Cuelist window trigger column defects
